If you use a water softener system on your home’s water supply to soften the water, experts strongly recommend that you first check its salt level. This is because if you use a water softener with a wrong salt level on your water supply, chances are a salt bridge may form on the tank, and an over-crusting of the salt layer could cause problems for you. Luckily, removing a water softener salt bridge can easily be done with the right steps.
Step #1: Turn Off the Water, and Break the Crust
When trying to remove the water softener salt bridge, you’ll want to stop the source first so the salt bridge won’t continue to form. With that in mind, be sure to turn off the water to the softener first either at the incoming faucet or by using the bypass valve at your home. Afterwards, take a long-handed tool like a broom or mop, and tap the salt bridge with the handle until the crust is broken.
Step #2: Remove the Loose Pellets, and Hammer the Edges
Once you’ve broken the water softener salt bridge, scoop out the loose pellets from the top of the tank with a plastic container, and lightly hammer at the salt crust’s edges. While you’re doing it, however, make sure that you avoid hammering the sides of the tank to prevent damaging it and causing leaks in your home.
Step #3: Vacuum Out the Water, and Turn Back on the Water
Once you’ve hammered the salt crust’s edges, remove the small salt chunks again with a plastic container. Then, drain the water in the bottom of the water softener with a wet/dry vacuum. Afterwards, turn the water on again, and follow the softener’s instructions to regenerate them. Once you’ve done so, refill the brine tank with salt. If you follow these instructions to the letter, then your salt bridge problem should be solved immediately.
Looking for someone who can assist you in maintaining your home’s plumbing? Don’t hesitate to turn to RainSoft of NE Iowa. Give us a call at (319) 233-2038, or fill out our contact form to get a quote and schedule a free water test today!
Resin, resin, resin. It's everywhere and used for a numerous amount of products and designs.…
Drinking water safety is a top concern for our customers! Whether your concern is reducing…
Manganese is one of the most abundant metals in the earth’s surface and soil. It…
As the coldest months of the year settle in, plumbing issues at home become increasingly…
One of the possible reasons your household bills keep piling up is hard water. Fortunately,…
According to professionals, hard water isn’t actually detrimental to your health. However, it can cause…